读知识>英语词典>powder room翻译和用法

powder room

英 [ˈpaʊdə ruːm]

美 [ˈpaʊdər ruːm]

n.  (委婉语)女洗手间; (常为客人用)盥洗室

牛津词典

    noun

    • (委婉语)女洗手间
      a polite word for a women's toilet/bathroom in a public building
      1. (常为客人用)盥洗室
        a small room in a house containing a washbasin and a toilet, usually for guests to use

        柯林斯词典

        • (宾馆等公共场所的)女盥洗室,女卫生间
          Apowder roomis a room for women in a public building such as a hotel, where they can use the toilet, have a wash, or put on make-up.

          英英释义

          noun

          • a woman's restroom in a public (or semipublic) building
              Synonym:ladies' room

            双语例句

            • The wood screen Blocks off the powder room In the early 1920's, the battery industry's first "non wood" separators appeared.
              木隔板把化妆室隔开早在本世纪二十年代,蓄电池工业用的首批非木质隔板就出现了。
            • These indicated that YQJ& S adhesive and birch wood powder with high MC can react at room temperature sufficiently.
              结果表明:YQJ&S胶粘剂与高含水率的桦木木粉在室温条件下就能发生反应,并可以达到最大反应程度,使反应充分进行;
            • Phase diagrams and thermal properties in Li_2SO_4-CuSO_4 and Li_2SO_4-Li_3VO_4 systems have been studied by means of X-ray powder diffraction both at room and high temperatures and differential thermal analysis as well as specific heat determination.
              本文用X射线粉末衍射(高温与室温)、差热分析和比热测量等方法研究了Li2SO1-CuSO4、Lj2SO4-Li3VO4体系的相图和热学性能。
            • Cu-40% Zn powder is milled at-30 ℃ and room temperature respectively with a high energy mill. The phase transformation and microstructure are observed under X-ray diffractometer and scanning electron microscopy.
              将Cu-40%Zn(40%为质量分数)二元系粉末在-30℃和常温下进行高能球磨,并利用X射线衍射仪及扫描电子显微镜对球磨过程中的组织演变过程及微观形貌进行了研究。
            • Formation of Sn whiskers from ball milled powder at room temperature
              室温下球磨粉体中Sn晶须的自发生长
            • The powder room rest area, by contrast, is a very masculine decoration.
              而女厕所休息区则恰恰相反,是非常阳刚的装修设计。
            • Methods: The setting expansion ratio of refractory die material for slip casting core of sintered titanium powder at room temperature was performed, as well as thermal expansion ratio from room temperature to 800 ℃.
              方法:采用自制的钛合金粉浆涂塑底层冠用耐火代型材料(基础型),分别测定常温下的凝固膨胀率和室温至800℃的热膨胀率。
            • Although it is environment friendly, powder coating still has much room to be improved, especially in energy-saving, water-saving and environment protection.
              具有环保优势的粉末涂装从整个生产过程看还有改善的空间,在节能、节水和环保方面需进一步探讨。
            • Over the 2 θ range of 10 °~ 130 °, the powder XRD was performed at room temperature.
              在10℃~130°的2θ扫描角范围内,在室温下进行粉末X射线衍射。
            • Rapid quenched AlBi 9.4 alloy foil prepared with planar flow casting will degrades into black powder in the air at room temperature ( 16~ 20 ℃) with relative humidity of 30~ 40% RH.
              用平流铸造技术制备的急冷AlBi9.4合金箔在室温(16~20℃)下、相对湿度为30~40%RH的空气中粉化成黑色的AlBi9.4合金粉末。